BHS-A酸化防砂液研制及应用  

Development and application on BHS-A acidizing sand control fluid.

作　　者：乐小明[1] 张丁涌[1] 许新华[1] 张德崇[1] 曹峰[1] 

机构地区：[1]胜利油田有限公司现河采油厂

出　　处：《油气地质与采收率》2001年第4期72-73,共2页Petroleum Geology and Recovery Efficiency

摘　　要：由于电泵大泵强采 ,生产压差增大 ,胜利油区现河庄油田和王家岗油田沙一、二段低压疏松油层和稠油层出砂井和酸化后出砂井逐年大幅度增加。这些出砂井污染后的解堵造成更为严重的出砂。为此 ,研制了以树脂、阳离子聚合物、硫脲为主要原料 ,再与酸液复配制得的BHS -A酸化防砂液。室内实验表明 ,其溶蚀率大于 6% ,出砂量小于 0 .0 5g/L。现场试验 17井次 ,累计增油 10 5 5 4t。Because of enhanced recovery by electric pump or large?capacity pump and increment of producing pressure drop, the sand producers are increased by a wide margin year by year in Es 1 and Es 2 low pressure unconsolidated oil?bearing formations and heavy crude formations of Xianhezhuang and Wangjiagang oilfields in Shengli petroliferous province. Plugging removal after sand producers is contaminated results in more serious sand production, so BHS?A acidizing sand control fluid is developed. The resin, cationic polymer and thiourea are the main raw materials, which is re?combined with acidizing fluid. Laboratory experiments show that corrosion ratio is more than 6% and sand production rate is less than 0.05g/L. Field experiment is 17 well times with 10554t of cumulative incremental oil production.

关 键 词：低压疏松油层 稠油层 酸化防砂液 出砂量 应用 胜利油区 

分 类 号：TE358.1[石油与天然气工程—油气田开发工程]