检索规则说明:AND代表“并且”;OR代表“或者”;NOT代表“不包含”;(注意必须大写,运算符两边需空一格)
检 索 范 例 :范例一: (K=图书馆学 OR K=情报学) AND A=范并思 范例二:J=计算机应用与软件 AND (U=C++ OR U=Basic) NOT M=Visual
作 者:陈旭[1] 安柯[1] 齐荣[1] 伊藤隆基[2] 坂根政男[2]
机构地区:[1]天津大学化工设备与机械系,天津300072 [2]日本立命馆大学机械系
出 处:《机械强度》2001年第3期316-318,279,共4页Journal of Mechanical Strength
基 金:国家自然科学基金资助项目 (1 9872 0 4 9)~~
摘 要:在拉扭疲劳试验机上完成了一系列非比例加载下对 30 4不锈钢的低周疲劳试验 ,对目前常用的几种多轴疲劳寿命预测模型进行了分析比较。结果表明 ,以单轴疲劳寿命分析方法为基础的等效应变法 ,不能预测多轴非比例加载下的低周疲劳寿命 ,以临界面法为基础的Socie剪切模型对非比例加载下 30A series of experiments on low cycle fatigue under nonproportional loading were conducted on tension-torsional fatigue facility for 304 stainless steel. Several multiaxial fatigue criteria in common use were analyzed. It shows that equivalent strain approaches based on uniaxial fatigue life analysis methods like maximum shear strain parameter and maximum normal strain parameter couldn't predict low-cycle fatigue lives under nonproportional cyclic loadin. Because of not considering of deformation behaviour under nonproportional loading, the unconservative predictions of the factor of five times are given. The predictions of SWT model based on tensile critical plane are generally within a factor of two scatter band, but some test points are on unsafe side. The Socie shear model based on critical plane approach gives better prediction when it is used to predict fatigue lives of 304 stainless steel under nonproportional loading. The predictions of Fatemi model based on shear critical plane approach are on conservative side.
分 类 号:TG142.71[一般工业技术—材料科学与工程]
正在载入数据...
正在载入数据...
正在载入数据...
正在载入数据...
正在载入数据...
正在载入数据...
正在载入数据...
正在链接到云南高校图书馆文献保障联盟下载...
云南高校图书馆联盟文献共享服务平台 版权所有©
您的IP:216.73.216.229