电弧喷涂经历不同热过程后的行为  

BEHAVIOR FOR ARC SPRAYER LAYER UNDERGONE DIFFERENT THERMAL PROCESS

作　　者：温瑾林[1] 张中礼[1] 

机构地区：[1]沈阳工业大学

出　　处：《焊接》1989年第5期4-7,共4页Welding & Joining

摘　　要：探讨了电弧喷涂的铝青铜及Cr13钢涂层,分别加热到500℃及900℃并保温1h后,涂层与基体的结合强度、涂层自身强度及抗热冲击等性能。Arc sprayed layer of aluminium bronze and Cr13 steel on base metal are treated under condition of heating up to 500℃ and 900℃ selparatety and holding the specimens at that constant temperature for 1h, then the strength bonded between layer and base metal, layer strength itself and thermal shock resistance of layer bonded with base metal are tested respectively. The paper describes the results of every event above.

关 键 词：电弧 喷涂 涂层 传热过程 

分 类 号：TG174.442[金属学及工艺—金属表面处理]