测压铜柱准动态压力校准表的适用范围  

DISCUSSION ON THE APPLICATION SCOPE OF QUASI-DYNAMIC CALIBRATION TABLE OF COPPER CYLINDERS

作　　者：孔德仁[1] 朱明武[1] 张淑宁[1] 李永新[1] 

机构地区：[1]南京理工大学机械学院,南京210094

出　　处：《弹道学报》2001年第3期92-96,共5页Journal of Ballistics

摘　　要：介绍了测压铜柱准动态校准压力表的编表方法 ,分析了编表误差 .利用落锤液压动标装置进行了某批次 Φ3 .5× 8.75铜柱变压力脉宽的校准实验 ,利用回归技术建立了以压力及脉宽为变量 ,铜柱变形量为因变量的经验模型 ,以此模型为基础探讨了被测压力脉宽变化时查表误差的变化规律及其脉宽适用范围 .The means of working out the table of quasi-dynamic calibration of copper cylinders is presented. The error on working out the table with quasi-dynamic calibration is also analyzed. The calibration experiment of some copper cylinders has been done on the dropper-hammer dynamic pressure calibration device by means of changing calibration pressure's pulse-width. According to the data acquired from the calibration, the relation model of cylinder's deformation to maximum pressure and pressure pulse-width is made by means of regression analysis. Based on this model, the variation law of error caused by pressure pulse-width on checking the table of pressure-measuring copper cylinders is discussed. The application scope of this model is also discussed.

关 键 词：铜柱测压系统 压力校准 误差分析 回归分析 准动态校准 准动态压力校准表 适用范围 膛压测量 

分 类 号：TJ06[兵器科学与技术—兵器发射理论与技术] TH812[机械工程—仪器科学与技术]