基于自适应滤波的铸轧板形检测信号分析  

Roll casting flatness detection signal analysis based on adaptive filtering

作　　者：王文明[1,2] 钟掘 谭建平[3] 

机构地区：[1]湘潭工学院机械系 [2]中南大学机电工程学院,长沙410083 [3]中南大学机电工程学院

出　　处：《中国有色金属学报》2001年第6期1013-1016,共4页The Chinese Journal of Nonferrous Metals

基　　金：国家重点基础研究发展规划资助项目 (G19990 6 490 6 );国家计委重大资助项目 (计高技 [1998] 1985 )

摘　　要：超薄快速铸轧同常规铸轧相比 ,板形奇异机理复杂 ,板形现象突出。根据铸轧板形缺陷的表征特点 ,建立了铸轧板形的数学描述。将板形检测信号视为动态时间序列 ,运用自适应滤波理论 ,建立了一种通用的板形检测信号除噪方法。仿真结果表明该法除噪效果明显 ,能满足实时控制要求。The fast ultra thin gauge roll casting for aluminum strip rolling is a kind of highly efficient technology with obvious flatness phenomenon. The research focus in the roll casting field is to ascertain the cause of flatness defect and to seek the way of automatic flatness control. According to the characterization of roll casting strip shape, the mathematical expression of the roll casting flatness was established. Flatness detection signal was looked on as dynamic time series and by the theory of adaptive filtering a general method was developed to remove the harmful noise from the flatness detection signal. Simulation result proves that the method can be used in real time control with good effect.

关 键 词：铸轧 板形检测 自适应滤波 板形控制 信号分析 铝合金 

分 类 号：TG249.9[金属学及工艺—铸造] TG292