高重复率灯泵调Q掺钛宝石激光器研究  

Investigations on a High-repetition-rate Q-Switched Flashlamp-pumped Ti:sapphire Laser

作　　者：李子尧[1] 帅文[1] 黄晔[1] 王纪光[1] 殷绍唐[1] 吴路生[1] 

机构地区：[1]中国科学院安徽光学精密机械研究所,合肥230031

出　　处：《量子电子学报》2001年第4期349-351,共3页Chinese Journal of Quantum Electronics

基　　金：国家高技术八六三计划资助课题

摘　　要：报道了一台高重复率闪光灯泵浦的掺钛宝石激光器．采用自行研制的二步预燃短脉冲激光电源，泵浦φ８ ｍｍ×１６０ ｍｍ掺钛宝石棒，采用电光调Ｑ方法，获得动态激光输出能量 １９５ ｍＪ，动态调Ｑ激光脉冲宽度２０ｎｓ，重复率１０Ｈｚ的激光输出．In this paper, a high repetition-rate Ti:sapphire laser pumped by flashlamp is reported. With two-step simmering short-pulse laser power supply which was made domestically, and a φ8 mm×160 mm Ti:sapphire laser crystal rod, Q-switched laser output energy of 195 mJ with 20-ns-pulse-width was achieved with repetition-rate 10 Hz.

关 键 词：掺钛宝石激光器 闪光灯泵浦 重复率 调Q激光器 

分 类 号：TN248.1[电子电信—物理电子学]