TiNi薄膜马氏体稳定化及其形状记忆效应研究  

STABILIZATION EFFECT OF MARTENSITE AND SHAPE MEMORY EFFECT OF TiNi THIN FILM

作　　者：刘晓鹏[1] 金伟[1] 曹名洲[1] 杨大智[2] 陈非霞[2] 

机构地区：[1]中国科学院金属研究所,沈阳110016 [2]大连理工大学材料工程系,大连116024

出　　处：《金属学报》2002年第2期193-195,共3页Acta Metallurgica Sinica

基　　金：国家自然科学基金 59681004;59731030资助项目

摘　　要：用ＤＳＣ研究了预变形对Ｔｉ５１Ｎｉ４９形状记忆合金薄膜的相变行为的影响，结果表明：预变形后薄膜的马氏体发生了稳定化现象，第一次逆相变温度Ｔ１Ａ随预应变量增加而升高， 而在第二次相变循环中．马氏体稳定化现象消失， 逆相变温度Ｔ２Ａ基本恢复到变形前的温度值． 马氏体相变温度随预应变肇增大而降低，但 Ｒ相变受预变形影响不大， 形状记忆效应研究表明，Ｔｉ５１Ｎｉ４９合金薄膜的可恢复应变随预应变量的增加而增大，其最大值４５％在预应变量为６％时获得．The transformation behaviors of the deformed Ti51Ni49, thin film were investigated by differential scanning calorimeter measurement (DSC). The experimental results show that the deformation causes a stabilization effect on the inartenite. The reverse transformation temperature of the deformed Ti51Ni49 film was elevated to higher temperature on the first licating. However, the stabilization effect on the martensite vanishes in the subsequent thermal cycles. The martensitic transformation temperature of the deformed Ti51Ni49 was decreased by deformation. but the R-phase transformation was not affected. The experimental results also indicate that the recovery strain of Ti51Ni49 film increases with increasing the deformation strain which may reach a maximum value of 4.5% as the sample deformed to 6% strain.

关 键 词：TiNi薄膜 马氏体稳定化 形状记忆效应 形状记忆合金 

分 类 号：TG139.6[一般工业技术—材料科学与工程] TB381[金属学及工艺—合金]