不同膜组件形式的SMBR处理蛋白废水的特性研究  

Albumen wastewater treatment property using submerged membrane bio-reactor(SMBR) with different membrane module forms

作　　者：张颖[1] 任南琪[1] 田文军[1] 丁杰[1] 

机构地区：[1]哈尔滨工业大学市政与环境工程学院,黑龙江哈尔滨150090

出　　处：《哈尔滨工业大学学报》2001年第6期796-798,共3页Journal of Harbin Institute of Technology

基　　金：哈尔滨市科技攻关计划项目 ( 0 0 14 2 110 38)

摘　　要：以两种不同膜组件形式的浸没式膜生物反应器 (SMBR)处理蛋白废水 ;稳定运行时 ,二者COD的去除率均可达到 95 %左右 ,TN的去除率在 45 %以上 ,浊度的去除率可达到 98% .研究结果表明 :B种膜组件形式能有效防止端头污染 ,在一定程度上减缓膜水通量的衰减 ,而且对废水COD、TN的去除效果以及能耗方面与A种膜组件形式相差无几 ;同时 。When the system was stable ,the removal of COD was about 95%, the removal of TN was above 45% and the removal of turbidity was about98%.Research results suggested that the kind of B membrane module form could prevent end pollution effectively and lighten the attenuation of membrane flux to some extent . Furthermore, the kind of B membrane module form had almost the same COD removal rate , TN removal rate and power consumption as the kind of A membrane module form. At the same time , B was slightly better than A on the effect of TP removal.

关 键 词：浸没式膜生物反应器 膜组件形式 蛋白 废水处理 SMBR 

分 类 号：X703[环境科学与工程—环境工程]