不锈钢带材表面翅成形的研究  

A Study on the Fin Formation on Stainless Steel Packing

作　　者：汤勇[1] 周德明[1] 王威[1] 张娟[1] 

机构地区：[1]华南理工大学机电工程系,广东广州510640

出　　处：《华南理工大学学报（自然科学版）》2002年第2期21-24,36,共5页Journal of South China University of Technology(Natural Science Edition)

基　　金：国家自然科学基金资助项目 ( 2 0 0 760 15 ) ;广东省自然科学基金项目 ( 990 5 4 0 ) ;高等学校骨干教师资助计划资助

摘　　要：研究了正犁削不锈钢表面翅成形的加工机理 ,探索了形成规则翅片的刀具几何参数及犁削条件 ,着重对翅的形成过程进行了分析 ,并建立了数学模型 .理论分析和实验结果表明 ,翅的形成过程包括导入、犁切堆积及成翅三个阶段 ,而犁切堆积阶段是翅形成的关键 ,翅的高度随犁切深度的增加而增大 。The machining mechanism of normal plough for fin formation on stainless steel was studied. The tool geometric and plough condition for forming regular fin were investigated, special attention was given to the analysis of the process of forming fin structure. In addition, a mathematical model was established. The experimental results show that the fin formation consists of three stages, namely, the leading stage, the plough piling stage and the fin forming stage, among which the most important stage is the plough piling stage. The experimental results also show that the height of the fin structure increases with the plough depth, but its height is higher than the plough depth.

关 键 词：正犁削 不锈钢 表面翅成形 表面加工 犁切深度 犁切堆积 加工机理 

分 类 号：TG506.6[金属学及工艺—金属切削加工及机床]