板材拉深成形过程中摩擦条件与压边力设定关系研究  

Research on relationship between friction coefficient and blank holder force used in deep drawing

作　　者：汪锐[1] 郑晓丹[1] 王东哲[1] 何丹农[1] 张立人[2] 黄皆捷[2] 

机构地区：[1]上海交通大学国家模具CAD工程研究中心,200030 [2]上海通用汽车有限公司

出　　处：《锻压技术》2001年第6期20-23,共4页Forging & Stamping Technology

基　　金：上海市科学技术发展基金项目 (编号 991 1 1 1 0 1 1 )

摘　　要：利用“板料拉深成形摩擦系数测试系统” ,研究不同种类的润滑剂在不同压边力值设定条件下 ,拉深过程中的摩擦系数与压边力、拉深力与压边力之间的关系。从两种实验用坯料物理模拟的结果得知 :实验用的油基润滑剂其粘度值越大 ,拉深性能越好 ,受压边力数值设定的影响也越小 ;坯料尺寸的增加使拉深成形变得困难 ,但对摩擦系数的影响很小。The experimental research on the relationship between the blank holder force and the effects of different lubricants through measuring the coefficient of friction during deep drawing.The relationship between drawing force and blank holder force is also studied.The results are drawn though two types of blanks as follows:the higher is the viscosity of a lubricant,the better is the effect of lubrication while the less is the lubricant being affected by blank holder force.As the diameter of the blank increasing,the deep drawing process will be more difficult,and the blank diameter will do less to friction coefficient.This experiment study will be useful in the selection of lubricants and in the optimization of blank holder forces in practice.

关 键 词：拉深 润滑剂 压边力 摩擦系数 板材成形 

分 类 号：TG381[金属学及工艺—金属压力加工]