PFBC中试电站煤添加和灰排放技术  

Coal Feeding and Ash Discharge Technology in a PFBC (Pressurized Fluidized Bed Combustion) Pilot Power Plant

作　　者：熊源泉[1] 沈湘林[1] 章名耀[1] 褚永华[1] 

机构地区：[1]东南大学洁净煤发电和燃烧技术教育部重点实验室,江苏南京210096

出　　处：《热能动力工程》2001年第6期591-593,597,共4页Journal of Engineering for Thermal Energy and Power

基　　金：国家"九五"重点攻关基金资助项目( 97-2 2 6 );国家重点基础研究基金资助项目 (G19990 2 2 10 5 35 )

摘　　要：由于增压流化床燃烧 (PFBC)技术的自身特点 ,使得气力输送技术成为增压流化床燃烧技术连续稳定供料和排料的有效手段。作者考察了锅炉压力为 0 6MPa下 ,气力输煤系统喷射器 (无扩散管 )气体喷嘴的位置和固气比对输送稳定性的影响 ,以及在锅炉压力为 0 6MPa下连续气力输灰特性。试验研究发现 :输煤系统中 ,物料质量流率与喷射器的几何参数关系非常密切。输灰系统在较高的固气比 (μ≥3)The specific feature of pressurized fluidized bed combustion (PFBC) technology itself Ires led to the pneumatic transport technology becoming an effective means of continuous and stable feeding and discharge of solids for the above-cited technology. The authors have under a boiler pressure of 0.6 MPa investigated the effect of the location of gas nozzle in a pneumatic coal transport system injector (without a diffuser tube) and solid/gas ratio on the pneumatic transport stability. Also investigated were the characteristics of continuous pneumatic transport of ash under a boiler pressure of 0.6 MPa. Through the experimental investigation it has been found that in the coal transport system the mass flow rate of materials is closely related to the geometric parameters of the injector and the ash transport system can ensure a continuous and stable operation under a relatively high solid/gas ratio (μ≥3).

关 键 词：增压流化床燃烧 气力输灰 固气化 PFBC 电站 煤灰 添加技术 排放技术 

分 类 号：TM621.2[电气工程—电力系统及自动化]