连续冷却条件下耐磨球墨铸铁的成分和性能  

The Compositions and Properties of Wear Resistant Ductile Irons Produced by Continuous Cooling Process

作　　者：薛志勇[1] 赵爱民[1] 张丽娟[1] 毛卫民[1] 张乐平[1] 

机构地区：[1]北京科技大学,北京100083

出　　处：《铸造》2002年第2期99-102,共4页Foundry

摘　　要：采用正交试验和极差、方差分析法 ,研究了Si、Mn、B对球铁的硬度、冲击韧性的影响。结果表明 :Mn、Si、B含量分别为 2 0 %、 2 6 %、 0 0 0 6 %时 ,可以获得HRC为 5 0左右、冲击韧性大于 2 0J/cm2 的球墨铸铁 ,其基体为细针状贝氏体 +奥氏体组织 ,可以作为生产球磨机用的磨球。The influence on hardness and impact toughness of ductile irons was studied by elements Si, Mn and B, using the method of orthogonal experiment, and analysis of range and variance. Ductile irons with bainite and austenite can be used as production material of grinding ball and back board in the mill, hardness of which is about HRC 50 and impact toughness is more than 20 J/cm 2, when optimum levels of elements are 2 0%Mn, 2 6%Si and 0 006%B.

关 键 词：贝氏体球铁 连续冷却 正交试验 成分 性能 球墨铸铁 球磨机 

分 类 号：TG143.5[一般工业技术—材料科学与工程]