U形高筋整体壁板激光诱导精密成形实验研究  

Experimental Research on Laser Induced Precision Forming of U-shaped High-stiffener Integral Panel

作　　者：李彩玲 赖小明 王博 张玉良 崔超 沈晓宇 王少华 付守冲[2] 王伟[2] LI Cai-ling;LAI Xiao-ming;WANG Bo;ZHANG Yu-liang;CUI Chao;SHEN Xiao-yu;WANG Shao-hua;FU Shou-chong;WANG Wei(Beijing Spacecrafts Co., Ltd., Beijing 100194, China;Harbin Institute of Technology, Harbin 150001, China)

机构地区：[1]北京卫星制造厂有限公司,北京100194 [2]哈尔滨工业大学,哈尔滨150001

出　　处：《精密成形工程》2018年第6期65-68,共4页Journal of Netshape Forming Engineering

基　　金：国家科技重大专项(2014ZX04001-151)

摘　　要：目的提高U形高筋整体壁板激光诱导成形精度。方法根据U形高筋整体壁板特点,首先初步确定成形扫描策略,然后采用几何分析方法计算不同扫描位置成形后的理论变形量,并根据理论变形量对扫描策略和成形工艺参数进行优化。随后开展试验研究。同时利用在线可视化测量手段,对U形高筋壁板的变形量进行测量。结果扫描道次数和激光器功率大小对U形高筋整体壁板成形精度影响很大,随着扫描次数和激光器功率的增加,变形量随之增大。结论成形后板材的尺寸误差不大于0.4%,实现了U形高筋整体壁板的高精密成形。The paper aims to improve the laser-induced forming accuracy of U-shaped high-stiffener integral panel. According to characteristics of U-shaped high-stiffener integral panel, the forming scanning strategy was firstly determined, and then the geometric deformation analysis was carried out to calculate the theoretical deformation after forming in different scanning positions. And according to the theoretical deformation, the scanning strategy and forming process parameters were optimized. Experimental research was carried out. With the use of online visual measurement methods, deformation of the U-shaped high-stiffener integral panel was measured. Through experimental research, it was found that the scanning channel number and the laser power had a great influence on the forming accuracy of the U-shaped high-stiffener integral panel. The deformation increased with the increase of scanning number and laser power. The dimensional error of the formed sheet is not more than 0.4%, which enables high-precision forming of U-shaped high-stiffener integral panel.

关 键 词：激光诱导 U形高筋壁板 高精密成形 

分 类 号：V261[航空宇航科学与技术—航空宇航制造工程]