基于一维稳态纵向导热法对几种铸铁材料热物理性能的研究  

Research on Thermo-physical Properties of Several Cast Iron Materials by One-Dimensional Steady-state Longitudinal Thermal Conductivity Method

作　　者：陈静 杨大壮[1] 王涛[1] CHEN Jing;YANG Dazhuang;WANG Tao(College of Materials Science and Engineering,Chongqing University,Chongqing 400044,China)

机构地区：[1]重庆大学材料科学与工程学院

出　　处：《热加工工艺》2018年第22期94-96,共3页Hot Working Technology

摘　　要：采用KY-DRX.JH金属高温导热系数测试仪,测定不同合金成分铸铁材料的导热系数。结果表明:在100~550℃,灰铸铁的导热系数随温度的升高呈下降趋势,蠕铁在100℃的导热系数低于灰铁,其导热系数范围为33.33~42.47W/m·K;合金蠕铁的导热系数随温度的升高先升后降,峰值点在300℃左右。100℃时合金蠕铁的导热系数随基体中铁素体量的增加而提高。KY-DRX-JH metallic high-temperature thermal conductivity tester was used to test the thermal conductivity of the cast iron materials containing different alloy components.The results show that the thermal conductivity of gray iron is in decline trend with temperature increasing from 100℃ to 550℃,while the thermal conductivity ofvermicular graphite iron is lower than that of gray iron at 100℃,and its thermal conductivity ranges from 33.33W/m.K to 42.47W/m.K.The thermal conductivity of the alloyed vermicular graphite iron first increases then declines with temperature increasing,reaching its peak value at 300℃ or so;at 100℃,the thermal conductivity of the alloyed vermicular graphite iron increases as the ferrite content in substrate increases.

关 键 词：灰口铸铁 蠕墨铸铁 导热系数 

分 类 号：TG143[一般工业技术—材料科学与工程]