500kV集中式标准电容分压器的研制  

Development of 500kV Centralized Standard Capacitive Voltage Divider

作　　者：刘少波[1] 李文婷[1] 龙兆芝[1] 雷民[1] 周峰[1] 张弛[1] 郑炎[2] 涂琛 LIU Shaobo;LI Wenting;LONG Zhaozhi;LEI Min;ZHOU Feng;ZHANG Chi;ZHENG Yan;TU Chen(Measurement Research Institute,China Electric Power Research Institute,Wuhan 430074,China;Wuhan Ordnance N.C.O Academy,Wuhan 430075,China)

机构地区：[1]中国电力科学研究院计量研究所,武汉430074 [2]武汉军械士官学校,武汉430075

出　　处：《高压电器》2019年第1期197-202,共6页High Voltage Apparatus

基　　金：国家电网公司科技项目(5219991800G);国家自然科学基金(5160716)~~

摘　　要：研制了一种基于标准电容器的集中式电容分压器,该分压器的高低压臂电容电极采用同种金属极板材料并处于压缩SF6气体绝缘介质中,可以保证分压器高低压臂电容温度系数、电压系数等特性参数的一致性,进而保证电容分压器分压比的稳定性;采用理论计算及仿真分析相结合的方式确定了标准电容器各部分的尺寸。针对绝缘外筒表面上存在电压分布不均匀的情况,在分压器内部加设多层均压电极后改善了绝缘套管上的电场分布情况。经实际测试,标准电容分压器高压臂电容量及分压比实测值与理论计算值十分接近,其高压臂电容量电压系数为1.01×10-5。This paper developed a centralized standard capacitance divider based on standard capacitor.The high voltage arm and the low voltage arm using the same metal plate material and be placed in the compressed SF6 to ensure the consistency of the divider.By calculating and simulation analysis,the combination of the various parts of the standard capacitor is determined.According to the uneven voltage distribution on the surface of the insulating outer cylinder,we use several multilayer uniform electrodes to the internal voltage divider.By actual test,the measured value of the high voltage arm capacity and the divider ratio of the standard capacitive voltage divider is very close to the theoretical calculation value,and the voltage coefficient of e high voltage arm is 1.01×10^-5.

关 键 词：标准电容器 集中式 均压电极 

分 类 号：TM53[电气工程—电器]