基于步进电机程序控制的自动缫丝机络交机构设计  

Design of traverse mechanism in automatic silk reeling machine based on stepping motor program control

作　　者：周桃艮 姚跃飞[1] ZHOU Taogen;YAO Yuefei(Silk Institute, College of Materials and Textiles, Zhejiang Sci-Tech University, Hangzhou 310018, China)

机构地区：[1]浙江理工大学材料与纺织学院丝绸学院

出　　处：《浙江理工大学学报（自然科学版）》2019年第1期23-28,共6页Journal of Zhejiang Sci-Tech University(Natural Sciences)

摘　　要：将程序控制的步进电机作为自动缫丝机络交机构动力源,设计的络交机构体积较小,可自主设计络交运动规律,实现等速导丝。介绍了步进电机程序控制的络交机构运行原理,分析了该络交机构的一些参数;在此基础上,选用型号为J-4218HB4401的步进电机对实验室的缫丝平台的络交机构进行重新设计。结果表明:步进电机程序控制的络交机构,可以实现等速导丝,且可得轴向防叠周期大于5000次。When the stepping motor controlled by program was used as power source of traverse mechanism in automatic silk reeling machine,the size of designed traverse mechanism was smaller,the law of traverse motion could be freely designed,and the isokinetic guide silk could be realized.The operation principle of traverse mechanism controlled by the program of stepping motor was described. Moreover,the related parameters of the traverse mechanism were analyzed.On this basis,J-4218HB4401 stepping motor was selected to redesign traverse mechanism of silk reeling model in laboratory.The results showed that the traverse mechanism controlled by the program of stepping motor could achieve isokinetic guide silk,and the overlapping cycles at the axial direction exceeded 5000 times.

关 键 词：步进电机 络交机构 程序控制 运动规律 参数分析 

分 类 号：TS142.2[轻工技术与工程—纺织材料与纺织品设计]