万能工具铣床动态特性分析及结构动力修改  

Modification of Universal Mmill Mmachine

作　　者：何伟[1] 何邦贵[1] 杨朝丽[2] 

机构地区：[1]昆明理工大学机电工程学院,云南昆明650093 [2]昆明理工大学电子信息与机械工程系,云南昆明650118

出　　处：《昆明理工大学学报（理工版）》2002年第2期31-35,共5页Journal of Kunming University of Science and Technology(Natural Science Edition)

摘　　要：以Ｘ８１４０万能工具铣床平铣工况为研究对象，　对其在典型工况下进行相对激振动态试验，获得反映其动态特性的试验数据，　辨识出该铣床的模态模型，　在动力分析的基础上，找出了影响该铣床铣削加工能力和加工精度的薄弱模态及主振部件，　并结合主振部件的结构特征，　制定了结构动力修改方案及措施，　结构改进后，　该铣床的切削加工能力和加工精度得到了较大幅度的提高．The paper deals with the dynamic characteristic analysis and the structural dynamic modification of universal mill machine with horizontal milling. First the machine structure is excited with the method of opposite exciting. Second the modal parameters and modal shape are identified by the test data. The dynamic characteristics of the machine are analysed. Then based on the object function , the bad mode and its structure that affect the resistance to chatter of the mill machine and the surface smoothness of the workpiece are found out. After improvement the mill machine has high resistance to chatter and better surface smoothness than the old one.

关 键 词：动态特性 结构动力修改 模态分析 万能工具铣床 模态模型 

分 类 号：TG549.3[金属学及工艺—金属切削加工及机床]