聚醚砜表面光固定脲酶的研究  

The Study of Photochemical Immobilization of Urease on Polyether Sulfone Film Surface

作　　者：李赛[1] 傅皓[2] 罗祥林 万昌秀[2] 钟银屏[2] 

机构地区：[1]中国科学院成都有机化学研究所,成都610041 [2]四川大学高分子材料科学与工程系,成都610065

出　　处：《生物医学工程学杂志》2002年第1期13-16,共4页Journal of Biomedical Engineering

摘　　要：我们利用含芳香叠氮基的光活性酯将脲酶光固定在聚醚砜 (Polyether sulfone,PES)膜的表面。同时研究了紫外光辐照时间对固定化脲酶密度、固定化脲酶活性的影响 ,温度、p H值对自由脲酶、固定化脲酶相对活性的影响 ;并考察了固定化脲酶的相对活性随光活性酶浓度的变化、固定化脲酶的重复使用次数及储存稳定性等性质。结果表明 ,PES膜表面固定化脲酶的的浓度为 0 .33m g/ cm2 ;当紫外光辐照时间为 5分钟时 ,固定化脲酶的相对活性最高 ;固定化脲酶的最适 p H值和最适温度分别为 7℃和 5 0℃ ;在 5 0℃时 ,连续使用 12次后 ,固定化脲酶仍具有 5 0 %的催化活性 ;在 4℃保存储存一个多月仍可保持 80A new method of using photoactivable ester with azido group was described to immobilize urease on polyether sulfone(PES) film surface. The effects of photoactive enzyme concentration, temperature, pH, irradiation time on the activity of immobilized urease were investigated. Reused times and storage stability were also studied.The results showed that the surface concentration of urease immobilized on PES surface was about 0 33mg/cm 2. When the irradiation time was 5 minutes, the relative activity of immobilized urease was the highest and the activity increased with the increase of the concentration of photoactive urease solution. The optimum pH and temperature of immobilized urease were 7 and 50℃ respectively. The relative activity of immobilized urease was stable (50%) after 12 times reused at 50℃.

关 键 词：脲酶 光固定 聚醚砜 

分 类 号：R318.08[医药卫生—生物医学工程]