合金元素及热处理工艺对控制冷却贝氏体球铁性能的影响  

Effect of Alloying Elements and Heat-treatment Procedure on Mechanical Properties of Controlled Cooling Ductile Iron

作　　者：蒋业华[1,2] 周荣[3] 卢德宏[3] 邢建东[1] 

机构地区：[1]西安交通大学机械学院 [2]昆明理工大学机械学院,云南昆明650093 [3]昆明理工大学机械学院

出　　处：《铸造技术》2002年第1期53-55,共3页Foundry Technology

基　　金：云南省科技预攻关项目 (95 0 4 )

摘　　要：着重讨论合金元素Si、Mn及回火温度对控制冷却获得贝氏体复相球墨铸铁性能的影响 ,对比研究控制冷却、空淬、水淬热处理工艺下试样的性能 ;结果表明 ,2 .8%～ 3.2 %Si ,2 .7%～ 3.2 %Mn ,喷淋控制冷却后经 2 0 0～ 30 0℃低温回火 ,试样的力学性能最佳。控制冷却所获得的试样力学、磨损性能最优。The effect of silicon, maganese elements and temper temperature on properties of bainitic ductile iron in a controlled cooling procedure were extensively investigated in this paper. The properties of samples heat treated by air cooling and quenching were also measured in the same time. The optimum parameters for the controlled cooling technique are to be kept in 200～300 ℃of temper temperature. Its chemical composition should be chosen as silicon of 2.8wt% ～3.2wt% , maganese of 2.7wt%～3.8wt%. By this way the mechanical properties and wear resistance of samples are expected.

关 键 词：合金元素 热处理工艺 控制冷却 贝氏体球墨铸铁 

分 类 号：TG255[金属学及工艺—铸造] TG143.5[一般工业技术—材料科学与工程]