10Cr9Mo1VNbN/12Cr1MoV异种钢焊接接头的蠕变损伤及界面失效  

Research on the Creep Damage and Interfacial Failure of Dissimilar Metal Welded Joint Between Martensite and Pearlite Steel

作　　者：张建强[1] 吴甦[1] 赵海燕[1] 王煜[1] 章应霖[2] 彭先宽[2] 

机构地区：[1]清华大学,北京100084 [2]武汉大学,武汉430072

出　　处：《焊接学报》2002年第2期75-79,共5页Transactions of The China Welding Institution

摘　　要：针对马氏体耐热钢 10Cr9Mo1VNbN和珠光体耐热钢 12Cr1MoV ,采用TGS -9cb、H10Cr5Mo、TR31三种焊丝形成高、中、低匹配焊接接头 ,利用脉冲电流氩弧焊、高温加速模拟工况、力学性能试验及电子显微分析 ,研究了 10Cr9Mo1VNbN/ 12Cr1MoV异种钢焊接接头的力学性能、高温强度、界面蠕变损伤及失效特征。试验结果表明 ,焊前预热 2 5 0℃ ,焊后回火 75 0℃× 1h ,加速模拟运行 5 0 0h后 ,高匹配和中匹配接头的力学性能劣化明显 ,界面蠕变损伤及失效倾向较大 ;而低匹配接头的力学性能优于高匹配和中匹配接头 ,界面蠕变损伤较轻 ,失效倾向较小。因此 ,选用TR31焊丝作为10Cr9Mo1VNbN/ 12Cr1MoV异种钢焊接接头的填充材料较为合适。In this article, the mechanical properties, creep damage, creep rupture strength and features of interfaciaL failures of welded joints between martensite ( SA213191) and pearlite steel ( l2Crl MoV) have been investigated by means of argon tungsten pulsed arc welding, high temperature accelerated simulation, creep rupture, mechanical property tests and scanning electronic microscopy ( SEM). The research results indicate that the interface between weld and l2Crl MoV steel is the weakest part of welded joint. However ,the interfacial failure tendency of low match welded joint is less than those of medium and high match welded joint. Therefore ,it is resonable that the low match welding material is used as the filler metal of weld between SA21T91 and l2Crl MoV steel.

关 键 词：异种钢焊接接头 蠕变损伤 界面失效 

分 类 号：TG457.11[金属学及工艺—焊接]