RTM用环氧树脂体系的固化工艺研究  

STUDY ON THE CURING PROCESSING OF EPOXY RESIN SYSTEN IN RTM PROCESS

作　　者：汪明[1] 张佐光[1] 胡宏军[2] 李宏运[2] 

机构地区：[1]北京航空航天大学,100083 [2]北京航空材料研究院

出　　处：《玻璃钢／复合材料》2002年第2期38-40,共3页Fiber Reinforced Plastics/Composites

摘　　要：本文研究了以多官能团环氧树脂及液体酸酐为基体 ,以叔胺及有机酸盐为促进剂组成的RTM用环氧树脂体系 ,采用DSC和DMA等方法研究了树脂体系的固化工艺及固化物的性能。结果表明 :该树脂体系粘度低 ,适用期长 ,适用于RTM工艺 ;该树脂体系的湿热性能较差 。The epoxy resin system is applied to RTM process. It consists of multi-functional epoxy resin and liquid anhydride as the matrix, trialkylamine and salt of organic acid as the accelerator. Curing processing and cured properties are studied by DSC and DMA. It shows that this resin system is adequate for RTM process because of its low viscosity and long shelf life? Moreover,the properties of the hot/wet resistence need to be improved.

关 键 词：树脂传递模塑 RTM 环氧树脂体系 固化工艺 研究 

分 类 号：TQ323.5[化学工程—合成树脂塑料工业]