高浓度有机废水大型厌氧反应器的调试和起动运行  

DEBUGGING AND STARTING OPERATION OF A LARGE ANAEROBIC REACTOR FOR HIGH CONCENTRATION ORGANIC WASTEWATER

作　　者：李锡英[1] 刘戈[1] 杨沂凤[1] 

机构地区：[1]江西省科学院能源研究所,南昌330029

出　　处：《环境工程》2002年第2期32-33,共2页Environmental Engineering

摘　　要：介绍了高浓度有机废水大型厌氧反应器的调试和起动运行的全过程。采用处理同类废水中温发酵的厌氧污泥作种泥 ,满罐低浓度接种。通过逐步提高负荷和升温 ,培养和驯化出足够数量高温发酵的活性污泥 ,6 0d以内就能正常生产运行 ,达到设计所预期的目标。较常规起动方法可缩短时间The full process of debugging and starting operation of a large anaerobic reactor for high concentration organic wastewater is presented in this paper.A medium temperature fermented anaerobic sludge by treating the same sort wastewater is used,and seeding of full pot and low concentration is also adopted.Load and temperature are gradually raised.Enough hot fermented active sludge is cultivated.The system can operate normally after two months,and costs less time than the ordinary starting method.

关 键 词：大型 厌氧反应器 高浓度有机废水 调试 起动运行 废水处理 

分 类 号：X703[环境科学与工程—环境工程]