400MPa超级钢热连轧过程中再结晶及流变应力的预测  

PREDICTION OF RECRYSTALLIZATION AND FLOW STRESS DURING MULTIPASS HOT ROLLING OF 400?MPa SUPER-STEEL

作　　者：许云波[1] 刘相华[1] 王国栋[1] 

机构地区：[1]东北大学

出　　处：《钢铁研究》2002年第3期28-30,共3页Research on Iron and Steel

基　　金：国家重大基础研究 973资助项目G19980 6 15 0 9

摘　　要：开发了描述低碳钢软化行为的再结晶模型 ,并对奥氏体再结晶动力学和微观组织演变进行了模拟计算。在此基础上建立了计算精轧过程应力—应变模型 ,根据现场数据预测了 4 0 0MPa级超级钢细晶化轧制的轧制力 ,预测结果与实测值吻合。这项研究可广泛用于钢种开发。Synopsis A recrystallization kinetics model to describe the softening behavior of low carbon steel was developed and used for simulation of austenite recrystallization and microstructure evolution. On this basis, a flow stress model to calculate the multipass stress-strain curve during finishing rolling was made out. By means of these models and on-site data, the predicted results of rolling road during finishing rolling of 400?MPa super-steel were given and they were in good accordance with measurements. It showed that these models can be widely used for steel grades design, rolling schedule optimization and on-line control of hot rolling process.

关 键 词：热轧 流变应力 再结晶动力学 微观组织演变 超级钢 连轧 低碳钢 

分 类 号：TG335.1[金属学及工艺—金属压力加工] TG111.7