等离子喷涂NiCr合金基复合梯度润滑涂层的组织与力学性能研究  

Research on Microstructure and Mechanical Properties of Plasma Spra-yed High-temperature Self-lubricating Compsite Coating

作　　者：周静[1] 曹兴进[2] 张隆平[3] 吴护林[3] 韦云隆[4] 

机构地区：[1]重庆工学院,重庆400050 [2]重庆大学,重庆400044 [3]中国兵器工业第五九研究所,重庆400039 [4]汕头大学,广东汕头515063

出　　处：《表面技术》2002年第3期17-20,共4页Surface Technology

摘　　要：选取了具有优异的高温性能和一定的自润滑性能的高温镍基合金 ,作为复合涂层基体材料 ,润滑相则分别从高、中、低温固体润滑剂中选取了Ag、CaF2 、石墨 (C)、MoS2 、BN为基本润滑组元 ;耐磨相则选用了在高温下具有良好的抗氧化性能及耐磨损性能的碳化铬 (Cr3C2 )硬质粒子 ,采用等离子喷涂技术制备了具有极佳相容性的高温润滑涂层。涂层的结合强度测定、硬度测定和扫描电镜分析均显示出涂层的梯度结构优于单层结构。梯度结构缓和了涂层内部的物理性能差异 ,不仅使涂层的硬度得到平缓过渡 ,而且使涂层的结合强度大大提高 。In this paper, nickel chromium alloy with excellent high temperature capability and a certain self lubricating capability is selected as the matrix material. Well, Ag?CaF 2?C?MoS 2 and BN are picked out as lubricants from all kinds of solid lubricants used from low temperature to high temperature. More over, Cr 3C 2 horniness particle is pointed as wearable element. Passing the examination of hardness?anti friction and anti wear capability and SEM about the remelting coating by laser remelting treatment technics, it is revealed that the pore ratio of the remelting layer is reduced evidently, and the density of the layer is increased at the same time. Further more the microhardness and anti wear capability of the remelting coating is enhanced in an extant compared with coating without laser remelting.

关 键 词：高温润滑涂层 梯度结构 等离子喷涂 扫描电镜分析 

分 类 号：TQ639.2[化学工程—精细化工]