聚合物驱提液与控制含水的关系  

Relationship between increasing liquid production and controlling water cut in the process of polymer injection.

作　　者：陆先亮[1] 周洪钟[2] 徐东萍[2] 李传新[2] 姜颜波[3] 

机构地区：[1]中国地质大学 [2]胜利油田有限公司孤岛采油厂 [3]胜利油田有限公司地质科学研究院

出　　处：《油气地质与采收率》2002年第3期24-26,共3页Petroleum Geology and Recovery Efficiency

摘　　要：分析了孤岛油田聚合物驱不同见效阶段提液与含水率的变化关系 ;提出了不同见效阶段合理的提液时机和提液幅度 ;研究结果对进一步改善孤岛油田聚合物驱开发效果 。The relationship between increasing liquid production and controlling water cut at different response stages in polymer flooding of Gudao oilfield is analyzed. The reasonable opportunity and range of increasing liquid production at different response stages are advanced. The results have directive significance on further improving the development effect of the polymer flooding and enhancing oil recovery in Gudao oil field.

关 键 词：聚合物驱油 提液 控制 含水 提液进机 提液幅度 孤岛油田 

分 类 号：TE357.46[石油与天然气工程—油气田开发工程]