某高硫砷金精矿提取方法比较  

Compare Study on Extraction Methods for a High Sulfur Arsenic Gold Concentrate

作　　者：姜效军[1] 徐洪波[1] 王涛[1] 

机构地区：[1]鞍山钢铁学院应化系,鞍山114002

出　　处：《有色金属（冶炼部分）》2002年第4期34-36,共3页Nonferrous Metals（Extractive Metallurgy)

摘　　要：对辽南某高硫砷金精矿提取方法进行了比较。固液比 1:3,pH =10 5,NaCN =1g/L ,2 5～ 30℃ ,电动搅拌 2 4h或 36h常规氰化 ,浸出率仅为 5%左右。固液比为 1:4 ,氧气 5× 10 5Pa ,加压酸性预氧化浸出效果不好 ,浸出率为 39 6 %。硫脲提取pH =0～ 1 0 ,硫脲 =2 0g/L ,2 5～ 30℃ ,固液比 1:4 ,FeCl3 为氧化剂 ,电动搅拌 1 5～ 2h ,浸出率为50 9%。采用Ca(OH) 2 固硫固砷浸出 ,效果较好。烧渣酸洗 ,硫脲浸出 ,时间短 ,浸出率达 94 5% ,并可避免高毒性的氰化物。The several extraction methods for a high sulfur arsenic gold ores in South Liao ning were compared This concentrate is of 24 5% sulfur, 4 2% arsenic and 80g/t gold The common cyanide rate of gold is only 5% After pre treating with HNO 3 and H 2SO 4 at 5×10 5Pa, the cyanide rate can achieves 40% By roast pre treat of the gold ores with lime , then leached with thiourea, the leaching rate of the calcined ore could be increased to 94 5%

关 键 词：高硫砷金精矿 提取法 比较研究 炼金 

分 类 号：TF831[冶金工程—有色金属冶金]