基于硬磁薄膜材料的GMI传感器偏置磁场分布模拟  

Simulation of the bias magnetic field distribution of GMI sensor based on permanent magnetic film

作　　者：黎俊乔 晋芳[1] 周玲[1] 彭景[1] 

机构地区：[1]中国地质大学机械与电子信息学院,湖北武汉430074

出　　处：《磁性材料及器件》2014年第4期20-23,27,共5页Journal of Magnetic Materials and Devices

基　　金：国家自然科学基金青年科学基金资助项目(41004079);教育部科技项目博士点基金资助项目(20100145120007);中国地质大学(武汉)中央高校基本科研业务费专项资金资助项目(CUG120107)

摘　　要：由于GMI效应对磁场的对称性特点，在传感器设计中，通常采用引入偏置磁场的方法来提高GMI传感器的灵敏度。而采用硬磁薄膜材料作为GMI传感器的偏置磁场源，可在提供80～160A／m的偏置磁场的前提下，实现GMI传感器的低功耗和微型化。运用COMSOL软件对薄膜材料的空间磁场分布进行了模拟，研究了薄膜材料特性及其尺寸对空间磁场分布的影响，并对影响有限元分析结果可靠性的因素进行了探讨。研究结果表明，硬磁薄膜材料的剩余磁化强度为0.3～0．7MA／m、长度为5～7mm、厚度为7～13μm时可以为GMI传感器敏感元件提供符合要求的偏置磁场源。Because of the GMI effect＇s symmetrical impedance characteristics with the externally applied fields, the sensor is usually designed by adding a bias magnetic field to improve its sensitivity. Using permanent magnetic film to provide bias magnetic field, could not only meet the condition of 80-160 A/m bias field, but also benefit the miniaturization and the low-power dissipation of the sensor. A permanent magnetic film material model is established to simulate the field distribution of the film material to study the influence of the film property and size on magnetic field the film produces, and analyze the factors affecting the reliability of the FEM solution. The results show that film with remanent magnetization of 0.3 to 0.7 MA/m, length of 5 to 7mm and thickness of 7 to 13 μm can provide a bias field meeting the requirement for GMI senser.

关 键 词：GMI传感器 硬磁薄膜 偏置磁场 仿真 

分 类 号：TP212.13[自动化与计算机技术—检测技术与自动化装置]