检索规则说明:AND代表“并且”;OR代表“或者”;NOT代表“不包含”;(注意必须大写,运算符两边需空一格)
检 索 范 例 :范例一: (K=图书馆学 OR K=情报学) AND A=范并思 范例二:J=计算机应用与软件 AND (U=C++ OR U=Basic) NOT M=Visual
机构地区:[1]电子科技大学电子薄膜与集成器件国家重点实验室,四川成都610054
出 处:《磁性材料及器件》2014年第4期50-52,共3页Journal of Magnetic Materials and Devices
摘 要:通过在Li-zn铁氧体材料中掺入H38O3-Bi2O3-SiO2-ZnO(BBSZ)玻璃相(1~4wt%),利用氧化物法陶瓷工艺合成Li-Zn铁氧体材料。在900℃烧结获得了符合要求的Li-Zn铁氧体材料。讨论了材料的微观结构以及磁性能,包括饱和磁化强度必、矫顽力鼠以及剩磁比眠。结果表明,BBSZ掺杂能显著降低材料的烧结温度,饱和磁化强度Ms随BBSZ掺入量的增加先增大而后略微减小,矫顽力风随BBSZ掺入量的增加先明显减小而后略微增加。当BBSZ掺入量为1.5wt%时,可以获得最佳的综合性能。Using H3BO3-Bi203-SiO2-ZnO (BBSZ) glass as dopant, Li-Zn ferrite was successfully prepared at sintering temperature 900℃. The microstructure and the magnetic properties including Ms, Hc and Br/Bm of Li-Zn ferrite were discussed. The result shows that BBSZ-dopant can reduce the sintefing temperature significantly. As the amount of BBSZ increases, the saturation magnetization Ms increases first and then decreases slightly, and the coercivity Hc decreases significantly and then increases slightly. The best property was achieved for 1.5wt% BBSZ-dopant.
关 键 词:铁氧体移相器 Li-Zn铁氧体 BBSZ掺杂 磁性能
分 类 号:TM277[一般工业技术—材料科学与工程]
正在载入数据...
正在载入数据...
正在载入数据...
正在载入数据...
正在载入数据...
正在载入数据...
正在载入数据...
正在链接到云南高校图书馆文献保障联盟下载...
云南高校图书馆联盟文献共享服务平台 版权所有©
您的IP:216.73.216.208