基于LabVIEW的SPI串行总线接口的实现  

Implementation of SPI serial bus interface based on LabVIEW

作　　者：赵骁[1] 周斌[2] 赵华[2] 

机构地区：[1]南京航空航天大学,江苏南京210016 [2]中国科学院空间科学与应用研究中心,北京100190

出　　处：《现代电子技术》2014年第14期138-141,共4页Modern Electronics Technique

基　　金：国家自然科学基金青年基金项目(41004081)

摘　　要：为了便于具有SPI串行总线接口设备的调试,使用美国国家仪器公司(NI)的标准模块化设备模拟SPI串行总线接口信号;采用图形化编程语言LabVIEW得到数字波形格式的SPI信号,并设计程序对此格式的信号进行解析,利用NI公司的硬件设备实现该信号的输入与输出。经过实验测试,输出SPI接口信号的频率范围是0.5 Hz^500 kHz,输入的频率范围是0.5 Hz^900 kHz,误差小于10 ns,该方法可以用于SPI串行总线接口设备的调试中。In order to debug the device with SPI serial bus interface conveniently,the standard modular device of National Instruments（NI）was used to simulate SPI serial bus interface signals,LabVIEW was used to get the SPI signals in digital waveform format,a program was designed to analysis these signals,and the hardware equipments of NI was utilized to realize the input and output of these signals. The experimental testing result shows that the frequency range of the output signal from the SPI interface is 0.5 Hz to 500 kHz,the input frequency range is 0.5 Hz to 900 kHz,the error is less than 10 ns. This method can be used to debug SPI serial bus interface device.

关 键 词：SPI接口 串行总线接口 LABVIEW 测试 

分 类 号：TN710-34[电子电信—电路与系统] TP319[自动化与计算机技术—计算机软件与理论]