可拆全焊接板式换热器的传热特性  

Heat transfer characteristics in dismountable all-welded plate heat exchanger

作　　者：栾辉宝[1] 陈斌[1] 郑伟业[1] 夏晓宇[1] 陶文铨[2] 

机构地区：[1]中国船舶重工集团公司第七一一研究所,上海201108 [2]西安交通大学能源与动力工程学院,陕西西安710049

出　　处：《化学工程》2014年第7期32-36,共5页Chemical Engineering(China)

基　　金：国家重点基础研究发展计划(973计划)资助项目(2013CB228304);浙江省低碳脂肪胺工程技术研究中心(2012E10033)开放课题资助

摘　　要：对可拆全焊接板式换热器内的传热流动特性进行了数值模拟及实验研究。采用SOLIDWORKS软件对单个流道进行了无简化、全尺度的实体建模;采用ICEM软件进行了网格划分,网格数目3100万;采用FLUENT软件进行求解。并通过换热器样机进行中试规模的水水传热实验来验证模拟结果。样机采用相同板片,板片数目102片。通过对比发现,在雷诺数Re为500—6 000的范围内,数值模拟结果与实验结果误差在15%以内。模拟结果可以作为该类产品工业应用中设计选型及优化的依据。The numerical simulation and experiment of heat transfer and fluid flow in the dismountable all-welded plate heat exchanger （DAPHE ）were performed.The three-dimensional geometry without any simplification was modeled by software SOLIDWORKS.The geometry was meshed by software ICEM and the grid number was about 3 1 million.The case was solved by software FLUENT.A water-water heat transfer experiment was conducted with a heat exchanger prototype with 102 similar plates.It shows that the error between numerical and experimental results can be controlled within±15%when the Reynolds number ranges from 500 to 6 000.The numerical simulation is a reliable tool for sizing and optimum design of a DAPHE.

关 键 词：板式换热器 数值传热 CFD 实验 

分 类 号：TK172[动力工程及工程热物理—热能工程] TK124