新型光伏-太阳能环形热管/热泵复合系统  

A new photovoltaic solar-assisted loop heat pipe/heat-pump system

作　　者：张龙灿 裴刚[1] 张涛[2] 季杰[1] 

机构地区：[1]中国科学技术大学热科学和能源工程系,安徽合肥230026 [2]北京航天长征飞行器研究所,北京100076

出　　处：《化工学报》2014年第8期3228-3236,共9页CIESC Journal

基　　金：国家自然科学基金项目(51178442);中央高校基本科研业务费专项资金~~

摘　　要：光伏-太阳能环形热管/热泵复合系统将太阳能环形热管循环模式和太阳能热泵循环模式有机结合,两者采用相同的工质,共用一个PVT蒸发器和冷凝器。当太阳辐照强度较强,工质在PVT蒸发器中的温度高于冷凝器中的温度时,可以利用环形热管模式制热;当太阳辐照强度较弱或工质在PVT蒸发器中与冷凝器中的温差无法满足环形热管模式运行时,可以利用热泵模式制热。两种模式既能够独立运行,又可以互相切换,确保热能的稳定供应,同时能够明显降低系统耗电量。搭建了光伏-太阳能环形热管/热泵复合系统实验平台,对复合系统在环形热管模式和热泵模式独立运行时的瞬时性能和全天性能进行了实验研究。The photovoltaic solar assisted loop heat pipe system/heat-pump （PV-SALHP/HP） is the combination of solar assisted loop heat pipe system （SALHP） and solar assisted heat pipe （SAHP）. A photovoltaic/thermal （PVT） evaporator and condenser could be shared by two circling modes, and so is the working medium. The loop heat pipe mode will be utilized when solar radiation is strong and the temperature of working medium in PVT evaporator is higher than that in condenser. Correspondingly, the heat pump mode will be started when solar radiation is weak or the temperature difference of working medium in PVT evaporator and condenser cannot satisfy the condition of loop heat pipe mode. The loop heat pipe mode is passive and the heat pump mode is active, which means that the loop heat pipe mode does not consume work and the heat pump mode does. Therefore, the transformable mode of system could heavily reduce power consumption, raise the utilization ratio of solar energy, and promote energy saving. A PV-SAHP/LHP test rig is built. The instantaneous and daily performance of the loop heat pipe mode and heat pump mode is studied.

关 键 词：太阳能 热泵 环形热管 热力学 可用能 

分 类 号：TK51[动力工程及工程热物理—热能工程]