Functionalized CMK-3 mesoporous carbon with 2-amino-5-mercapto-1,3,4-thiadiazole for Hg(II) removal from aqueous media  

作　　者：Mansoor Anbia Roghaye Dehghan 

机构地区：[1]Research Laboratory of Nanoporous Materials, Faculty of Chemistry, Iran University of Science and Technology,Iran [2]Research Laboratory of Advanced Materials, Chemistry and Chemical Engineering Research Center of Iran,Tehran, Iran

出　　处：《Journal of Environmental Sciences》2014年第7期1541-1548,共8页环境科学学报（英文版）

基　　金：the Iran National Science Foundation for the financial support to this project

摘　　要：Ordered mesoporous carbon（CMK-3） was synthesized and functionalized with 2-amino-5-mercapto-1,3,4-thiadiazole groups（AMT-OCMK-3） for Hg（Ⅱ） removal from aqueous solution. The modified CMK-3 was characterized by X-ray diffraction, N2adsorption-desorption isotherm, scanning electron microscopy and Fourier transform infrared spectroscopy. The effects of solution pH, contact time, initial Hg（Ⅱ） concentration and matrix effect were studied. The adsorption data were successfully fitted with the Langmuir model, exhibiting high adsorption capacity of 450.45 mg/g of AMT-OCMK-3. In the solid-phase extraction system a series of experimental parameters such as sample flow rate, sample volume,eluent volume and concentration of the eluent solution have been investigated and established for preconcentration of Hg（Ⅱ） in aqueous solution. The results showed that the enrichment factor for Hg（Ⅱ） was 250, the precision（relative standard deviation（RSD）, %） for six replicate measurements was 2.05% and the limit of detection for Hg（Ⅱ） was achieved at0.17 μg/L.Ordered mesoporous carbon（CMK-3） was synthesized and functionalized with 2-amino-5-mercapto-1,3,4-thiadiazole groups（AMT-OCMK-3） for Hg（Ⅱ） removal from aqueous solution. The modified CMK-3 was characterized by X-ray diffraction, N2adsorption-desorption isotherm, scanning electron microscopy and Fourier transform infrared spectroscopy. The effects of solution pH, contact time, initial Hg（Ⅱ） concentration and matrix effect were studied. The adsorption data were successfully fitted with the Langmuir model, exhibiting high adsorption capacity of 450.45 mg/g of AMT-OCMK-3. In the solid-phase extraction system a series of experimental parameters such as sample flow rate, sample volume,eluent volume and concentration of the eluent solution have been investigated and established for preconcentration of Hg（Ⅱ） in aqueous solution. The results showed that the enrichment factor for Hg（Ⅱ） was 250, the precision（relative standard deviation（RSD）, %） for six replicate measurements was 2.05% and the limit of detection for Hg（Ⅱ） was achieved at0.17 μg/L.

关 键 词：Ordered mesoporous carbon CMK-3 Solid-phase extraction Hg（Ⅱ） Adsorption 

分 类 号：X703[环境科学与工程—环境工程]