研究薄层防锈油的电化学技术  

ELECTROCHEMICAL TECHNIQUE FOR INVESTIGATING THIN FILM RUST PREVENTIVE OIL

作　　者：张承典[1] 徐乃欣[1] 丁翠红[1] 王志杰[1] 

机构地区：[1]中国科学院上海冶金研究所

出　　处：《中国腐蚀与防护学报》1991年第3期263-270,共8页Journal of Chinese Society For Corrosion and Protection

基　　金：中国科学院腐蚀科学开放研究实验室课题

摘　　要：以往研究防锈油的电化学方法大多把涂油的金属试样浸没在溶液中,本文提出的新方法则在薄层水膜下进行。它是在特制的测试探头上涂油后覆盖镜头纸,置于湿热气氛中。已用该方法测试了极化电阻、极化曲线、交流阻抗等。Due to the electrochemical nature of atmospheric corrosion of metals, it is reasonable to evaluate the effectiveness of temporary rust preventive oil by electrochemical measurements. In the past, almost all such measurements were performed with the oil coated metal specimen being totally immersed in aqueous solution. Obviously such an experimental arrangement is quite different from the practical condition,under which the rust preventive oil is commonly used. In this paper a new method for evaluation of rust preventive oil is proposed, which allows electrochemical measurements to be done under thin water film. An electrode assembly similar to the morfitor initially designed for atmospheric corrosion study is constructed by alternate stacking of rectangular mild steel plates and placed in humid environment. However, moisture condensation on oily surface has been found to produce beads of water and has lead to unstable data readings. To obtain an uniform,reproducible and appropriately thick water layer on metal surface,a piece of lens paper is used to cover the surface of electrode assembly. By means of the proposed approach polarization resistance, polarization curves and ac impedance can be successively measured for both rust preventive oil and uninhibited oil in water vapor saturated atmosphere at 50℃.

关 键 词：防锈油 电化学 试验 

分 类 号：TG174.36[金属学及工艺—金属表面处理]