一种雷达频率源的简易设计方法  

A Simple Design Method of Radar Frequency Synthesizer

作　　者：刘类骥 王立生 

机构地区：[1]成都天奥电子股份有限公司,成都611731

出　　处：《电讯技术》2014年第4期476-479,共4页Telecommunication Engineering

摘　　要：针对传统多功能雷达频率源方案复杂、体积大、成本高的缺点,提出了一种雷达频率源的简易设计方法。该方法基于高频主振分频的频率合成方案,并通过信号频率的组合设计进一步简化了电路形式,成功实现了某型雷达所需的线性调频激励源、捷变频本振源、多普勒模拟源、采样时钟等多路信号的输出,X频段信号相位噪声达-106 dBc/Hz@1 kHz和-114 dBc/Hz@10 kHz,跳频时间小于2#s,性能指标与采用直接频率合成实现的雷达频率源相当。For the shortcomings that the radar frequency synthesizer based on traditional direct frequency syn-thesis is complex,large size and high cost,a simple design method is proposed. The method is based on high frequency master oscillator and simplifies the circuits by combinational design of signal frequency. With this method,the outputs of a frequency source of chirp signal,a frequency agile local oscillator,a doppler analog source,a sampling clock required by a radar frequency synthesizer are realized. The phase noise of X-band signal is -106 dBc/Hz@1 kHz,-114 dBc/Hz@10 kHz,respectively. The frequency hopping time is less than 2 μs. The performance has a considerable level with that of direct frequency synthesis.

关 键 词：X频段雷达 频率源 直接频率合成 高频主振 

分 类 号：TN74[电子电信—电路与系统]