Performance analysis and improvement of a high flow coefficient centrifugal compressor  

作　　者：WANG YongSheng WANG Kai LIN Feng NIE ChaoQun ENGEDA Abraham 

机构地区：[1]Key Laboratory of Advanced Energy and Power,Institute of Engineering Thermophysics,Chinese Academy of Sciences [2]Graduate University of Chinese Academy of Sciences [3]Department of Mechanical Engineering,Michigan State University

出　　处：《Science China(Technological Sciences)》2014年第8期1647-1657,共11页中国科学（技术科学英文版）

基　　金：supported by the National Natural Science Foundation of China(Grant Nos.51206164 and 51010007)

摘　　要：Very high flow coefficient centrifugal compressor stages are mostly performance of this type of stages is critical to the entire centrifugal applied as the first stages of multistage compressors. The compressors, but surprisingly little related information is available in the open literature. A centrifugal compressor with high inlet flow coefficient of 0.2, presenting a narrow operating range and unstable running situation even at design speed during the test, is investigated here. To reveal flow details in this centrifugal compressor, numerical simulations have been carried out and indicate that excessive impeller flow diffusion results in the poor performance of this centrifugal compressor. With the same inlet flow coefficient, six redesign cases coming from an in-house one-dimensional analysis program are proposed together with impeller trimming and equal flow area design method for corresponding vaneless diffuser. Performance comparison among these redesign centrifugal compressors is presented and the most suitable one is recommended for test in the future. In addition, three redesign cases with lower inlet flow coefficient developed by means of flow trimming are shown in the end to satisfy potential application areas. Finally, the results in this study can provide valuable reference information for multistage centrifugal compressor design.

关 键 词：centrifugal compressor very high flow coefficient IMPROVEMENT impeller trimming 

分 类 号：TH452[机械工程—机械制造及自动化] TV66[水利工程—水利水电工程]