石蜡基和环烷基基础油复配乳化切削液性能研究  

The Properties of Emulsion Cutting Fluid with Paraffin and Naphthenic Oil as Complex Base Oils

作　　者：尤龙刚[1] 鲁倩[1] 陈志忠[1] 于海[1] 

机构地区：[1]中国石油兰州润滑油研究开发中心,甘肃兰州730060

出　　处：《润滑与密封》2014年第8期119-122,共4页Lubrication Engineering

摘　　要：以不同黏度石蜡基和环烷基复配基础油调和一系列乳化液,分别通过电导率法、马尔文颗粒度法考察乳化液的稳定性,采用Micro Tap G-8攻丝扭矩试验考察乳化液的切削加工性能。研究结果表明,采用石蜡基和环烷基复配的黏度为20 mm2/s基础油所制备的乳化液的稳定性最佳,且有色金属切削加工性能突出。The series of emulsion were prepared from different viscosity of paraffin and naphthenic of complex base oils. The stability of the emulsion was investigated by the conductivity method and the Malvern laser particle analyzer,and the machinability was investigated by Micro Tap G-8 tapping torque （Micro Tap）. The results show that the emulsion synthe-sized from paraffin and naphthenic of complex base oils with viscosity of 20 mm2/s has good stability and excellent machin-ability of non-ferrous metals.

关 键 词：切削液 乳化液 基础油 稳定性能 

分 类 号：TG501.5[金属学及工艺—金属切削加工及机床]