MBBR悬浮填料低温处理生活污水对比实验研究  

Comparative research on MBBR suspended carriers for the municipal sewage treatment at low temperature

作　　者：任彦强[1] 赵雪莲 李宗慧 邢成良 

机构地区：[1]桑德集团有限公司,北京101102 [2]北京伊普国际水务有限公司,北京101102

出　　处：《河北工业科技》2014年第3期215-219,共5页Hebei Journal of Industrial Science and Technology

基　　金：北京市科技计划项目(Z111100058911002);国家水体污染控制与治理科技重大专项(2012ZX07318001)

摘　　要：悬浮填料是MBBR工艺处理污水的核心技术,也是填料性能工艺效果和工程成本的关键因素。采用自主研发的高亲水、低成本高分子合金材料,制备成蜂窝状悬浮填料,并与国内具有代表性的3种悬浮填料进行了性能对比实验研究。实验结果表明,MBBR工艺条件下,使用自制悬浮填料其亲水性、挂膜启动时间以及低温COD、氨氮降解效果具有优势;30%(体积分数)填充率的条件下,低温氨氮去除率达99%(质量分数),出水氨氮小于1 mg/L(质量浓度)。Suspended carrier is the core technology of MBBR for waste water treatment, and the property of the carrier is the key factor that influences technological effect and engineering cost. Honeycomb suspended carrier is prepared by using self-developed high hydrophilic low cost polymer alloy, and the property is compared with those of three tipieal domestic suspended carrier. The result shows that, by using MBBR process, the hydrophilicity of self-made suspended carrier, the film-attached time, and the removal rate of COD and ammonia nitrogen at low temperature perform better. When the filling rate condition is at 30% （volune fraction）, the ammonia nitrogen removal rate reaches 99% （mass fraction） at low temperature, and the content of ammonia nitrogen left in yielding water is below 1 mg/L （mass concentration）.

关 键 词：悬浮填料 高分子合金材料 生物膜 生活污水处理 

分 类 号：X52[环境科学与工程—环境工程]