高能球磨法机械镀锌的试验研究  

Mechanical Zinc Plating by High Energy Ball Milling

作　　者：齐宝森[1] 徐英[1] 李木森[1] 孙希泰[1] 

机构地区：[1]山东大学材料科学与工程学院,济南250061

出　　处：《金属热处理》2002年第8期22-24,共3页Heat Treatment of Metals

摘　　要：利用高能球磨原理实现了低碳钢的机械镀锌。用金相显微镜、扫描电镜、X射线衍射和显微硬度等试验方法 ,测定了机械镀锌层的组织、相结构与硬度。试验结果表明 ,利用高能球磨原理 ,能在常温。The mechanical zinc plating of low carbon steel by high energy ball milling was studied.By optical microscope,SEM,XRD and micro hardness testing,the microstructure,phase structure and micro hardness of the plated case was measured.The results show that mechanical zinc plating could be obtained by high energy ball milling under normal temperature and vacuum without environmental pollution.

关 键 词：试验研究 高能球磨 机械镀锌 镀锌层 

分 类 号：TG174.44[金属学及工艺—金属表面处理]