F-48环氧树脂改性双酚A型氰酸酯树脂的研究  

Study of F-48 Epoxy Resin Modified Bisphenol A Cyanate Ester Resins

作　　者：吴金剑[1] 谢佳武[1] 王志娟[1] 赵丽娟[1] 汤嘉陵[1] 

机构地区：[1]四川大学高分子科学与工程学院,成都610065

出　　处：《材料导报》2014年第14期91-94,共4页Materials Reports

摘　　要：采用FT-IR与DSC研究了F-48酚醛型环氧改性双酚A型氰酸酯树脂的固化行为及固化工艺,通过DMA、TGA、介电性能和冲击强度测试对F-48酚醛型环氧改性双酚A型氰酸酯树脂的热性能、介电性能和韧性进行了研究。结果表明,随着F-48环氧树脂含量的增加,改性氰酸酯的Tg总体呈升高趋势,最高达到255℃;改性后的氰酸酯树脂热分解温度逐渐降低;F-48环氧树脂加入量为氰酸酯质量的25%时,改性氰酸酯树脂具有较低的介电常数和介电损耗;改性氰酸酯的冲击强度较纯氰酸酯树脂提高25%。The curing process and curing behavior of the F-48 novolac epoxy resin modified bisphenol A cyanate ester resins （BADCy） were studied by FT-IR and DSC. The thermal properties,dielectric properties and toughness of F-48 modified BADCy were investigated by TGA,DMA, dielectric and impact strength test. The results showed that the Tg of modified cyanate ester generally increases, up to 255 % and thermal decomposition temperature of the modi- fied cyanate ester resins gradually descreases with the increase of the content of F-48 epoxy. When F-48 epoxy resin is added in an amount of 25% by mass of cyanate ester resins, the modified cyanate ester resin, which has low dielectric constant and dielectric loss, exhibits an 25% raise in impact strength compared to pure cyanate ester resin.

关 键 词：F-48环氧树脂 氰酸酯 介电性能 

分 类 号：TQ322.4[化学工程—合成树脂塑料工业]