水合焦油废水的废弃活性炭吸附法处理工艺  

Technological Processes of Adsorption with Waste Activated Carbon for Hydrated Tar Wastewater Treatment

作　　者：刘瑞红[1] 刘莉莉[1] 林匡飞[1] 王晓[2] 李洪[1] 张雅聪[1] 

机构地区：[1]华东理工大学资源与环境工程学院,上海200237 [2]青海大学化工学院,青海西宁810016

出　　处：《净水技术》2014年第4期78-83,共6页Water Purification Technology

基　　金：国家自然科学基金(41001316);中央高校基本科研业务费(WB1214059)

摘　　要：为了实现高原电解铝碳阳极生产中沥青烟气净化水合焦油的综合处理利用,采用活性炭吸附法处理水合焦油废水。考察了活性炭静态吸附和动态吸附焦油废水过程中主要影响参数,如吸附剂用量、反应时间、停留时间、pH、进水流速、活性炭的类型、吸附层的高度及焦油废水浓度等,绘制了吸附等温线和穿透曲线。扩大试验进一步论证了活性炭吸附焦油废水的可行性。For realizing treatment and utilization of hydrated tar wastewater purification from carbon anode production of plateau aluminum asphalt flue gas,activated carbon adsorption treatment was used in this experiment. The influence factors of activated carbon in static adsorption and dynamic adsorption tar wastewater process,such as dosage of adsorbent,reaction time,residence time,pH, water flow rate,types of activated carbon,activated carbon adsorption layer height and the concentration of tar wastewater and so on were studied. The adsorption isotherms and breakthrough curves were concluded. It was demonstrated in a pilot test activated carbon adsorption tar waste water was feasible.

关 键 词：活性炭吸附 水合焦油废水 COD SS 氨氮 

分 类 号：TU992[建筑科学—市政工程]