轴承内圈冷辗扩封闭成形热力耦合有限元分析  

Thermal-mechanical Coupled FE Analysis on Closed Cold Rolling Forming of Bearing Inner Ring

作　　者：洪哲[1,2] 孙宝寿[1,2] 束学道[1,2] 彭文飞[1,2] 

机构地区：[1]宁波大学机械工程与力学学院,浙江宁波315211 [2]浙江省零件轧制成形技术研究重点实验室,浙江宁波315211

出　　处：《热加工工艺》2014年第15期107-109,113,共4页Hot Working Technology

基　　金：浙江省自然科学基金资助项目(LY12E05008);国家自然科学基金资助项目(51075216);浙江省大学生科技创新活动计划暨新苗人才计划项目(2013R405065)

摘　　要：基于ABAQUS软件建立了圆锥滚子轴承内圈冷辗扩封闭成形热力耦合有限元模型。通过对坯料辗扩过程中应力应变分析,获得了圆锥滚子轴承内圈辗扩过程中金属流动规律。结果表明,辗扩过程中金属流动由小端面向大端面。分析了封闭辗扩过程中坯料温度的分布规律,并与开式辗扩过程进行了对比。结果表明,封闭辗扩有利于改善端部质量,但辗扩时温度比开式成形要高。Thermo-mechanical coupled finite element model of tapered roller bearing inner ring cold rolling closed forming was established based on the software ABAQUS. The metal flow law of tapered roller beating inner ring rolling process was obtained by analyzing the stress and strain of the blank rolling process. The results indicate that metal flow in rolling process is from the small end surface to the big end surface. The distribution law of temperature in the closed rolling was analyzed and compared with the open rolling. The results indicate that closed rolling is beneficial to improve the quality of the end surface, but the temperature is higher than that of the open rolling.

关 键 词：冷辗扩 封闭成形 热力耦合 有限元 

分 类 号：TG335.12[金属学及工艺—金属压力加工]