聚砜膜的低温等离子体改性及其在膜式氧合器的应用  

Modification of polysulfone membrane by low temperature plasma technology and its application in membrane oxygenator

作　　者：殷海燕[1] 刘耀东[1] 黄鑫[1] 吕权[1] 虞文魁[2] 李磊[1] 

机构地区：[1]南京大学化学化工学院,南京210093 [2]南京大学医学院,南京210093

出　　处：《膜科学与技术》2014年第4期50-55,共6页Membrane Science and Technology

基　　金：江苏省自然科学基金面上项目(BK2012727)

摘　　要：采用低温等离子体技术对用于膜式氧合器的聚砜(PSf)膜进行表面改性,通过接枝聚乙二醇(PEG)和肝素以改善其血液相容性.系统研究了接枝的PEG分子量及不同等离子体处理条件对改性效果的影响.研究结果表明,当PEG分子量为6 000,等离子预处理功率为150W,预处理时间为2min,处理气体为氩气(Ar)时,改性效果最佳,接触角明显降低,蛋白吸附显著减少.膜的汽液双侧传输性质测试结果表明,改性后的PSf膜保留了初始膜的气体传输性能,基本达到了医用人工肺材料的标准.In this study,polysulfone（PSf） asymmetric membranes used for membrane oxygenator were modified by low temperature plasma technology （LTPT） to improve their hemocompatibility.PSf membrane surface was activated by LTPT,and then polyethylene glycol （PEG） and heparin were grafted onto membrane surface.The effects of PEG molecular weight and plasma treatment conditions on modification results were investigated thoroughly.It was demonstrated through experiments of membranes preparation that the modified membranes had the optimal results such as smaller contact angles and less adsorption of bovine serum albumin when the molecular weight of polyethylene glycol is 6 000,the plasma power is 150 watts,the treatment time is 2 minutes and the process gas is argon（Ar）.Besides,experimental results of gas-liquid transfer indicated that the modified membranes retained almost the same gas transmission performance as unmodified ones,which proved to reach the standard of medical membrane oxygeantor mainly.

关 键 词：聚砜膜式氧合器 低温等离子体 接触角 牛血清白蛋白吸附 

分 类 号：TQ051.893[化学工程] TQ316.6