检索规则说明:AND代表“并且”;OR代表“或者”;NOT代表“不包含”;(注意必须大写,运算符两边需空一格)
检 索 范 例 :范例一: (K=图书馆学 OR K=情报学) AND A=范并思 范例二:J=计算机应用与软件 AND (U=C++ OR U=Basic) NOT M=Visual
作 者:李致家[1] 李兰茹[1] 黄鹏年[1] 李巧玲[1]
机构地区:[1]河海大学水文水资源学院,江苏南京210098
出 处:《河海大学学报(自然科学版)》2014年第4期283-288,共6页Journal of Hohai University(Natural Sciences)
基 金:国家自然科学基金(41130639;51179045;41201028);水利部公益性行业专项(201301068)
摘 要:选择屯溪、东湾及王快流域为典型流域,挑选合适的目标函数,采用单纯形法率定参数,研究流域分块对新安江模型SM、CS、CI及CG等参数的影响。结果表明,随着流域分块数增加:降雨资料均化程度减小,SM呈增大趋势,CS呈减小趋势,CI及CG基本保持不变;洪量、洪峰合格数及确定性系数均呈增大趋势,当子流域面积小于1000km2时模拟精度大幅度改善。In this study, we took the Tunxi, Dongwan, and Wangkuai watersheds as typical watersheds and studied the effect of watershed subdivision on the Xin’anjiang model’s parameters, including SM , CS , CI , and CG . We used the simplex algorithm with suitable objective functions to calibrate the parameters of the model. The results of the study show that, with the increase of the number of watershed subdivisions, the homogenization degree of rainfall data decreases, SM has an increasing trend, CS has a decreasing trend, and CI and CG remain invariant. The number of qualified flood volume and flood peaks and the deterministic coefficient show an increasing trend with the increase of the number of watershed subdivisions. When the area of the sub-watershed is less than 1 000 km2 , the simulation accuracy improves significantly.
正在载入数据...
正在载入数据...
正在载入数据...
正在载入数据...
正在载入数据...
正在载入数据...
正在载入数据...
正在链接到云南高校图书馆文献保障联盟下载...
云南高校图书馆联盟文献共享服务平台 版权所有©
您的IP:216.73.216.229