控冷过程中X65管线厚板残余应力仿真分析  

Simulation Analysis on Residual Stress of X65 Pipeline Thick Plate in Controlled Cooling Process

作　　者：刘海妹[1] 付浩[2] 张媛[1] 

机构地区：[1]河北化工医药职业技术学院,河北石家庄050000 [2]电子科技大学,四川成都610054

出　　处：《铸造技术》2014年第8期1896-1898,共3页Foundry Technology

基　　金：河北省教育科学"十二五"规划2012年度课题资助(2012B357)

摘　　要：以X65管线厚板为研究对象,利用有限元软件建立了连续控冷时的几何模型、本构模型和相变潜热模型,分析了控冷时整个板材的应力变化和温度变化。结果表明,上表面与心部的平均温度要大于下表面与心部的平均温度;对称控冷结束后残余应力沿板厚方向的分布情况为;应力呈现心部受压,上表面和下表面两侧受拉应力对称分布。Taking the X65 pipeline thick plate as research object, the geometric model, constitutive model and phase change latent heat model in the process of continuous controlled cooling were established by finite element software, and the changes of stress and temperature were analyzed. The results show that the average temperature of the upper surface and the core is higher than that of the lower surface and the core. The distribution of residual stress along the thickness direction is that the stress presents core compression and symmetric distribution of tensile stress in the upper surface and the lower surface.

关 键 词：X65管线厚板 控冷 有限元模拟 

分 类 号：TG115[金属学及工艺—物理冶金] TG142.1[金属学及工艺—金属学]