某汽车车门玻璃导轨结构件多工位级进模设计  

Design on multi- position progressive die for structural part of the glass rail in the car door

作　　者：郭鸣骥 夏琴香[1] 王霆[1] 陈志平 赵学智[1] 

机构地区：[1]华南理工大学机械与汽车工程学院,广东广州510640 [2]广东科龙模具有限公司,广东佛山528303

出　　处：《锻压技术》2014年第9期97-101,共5页Forging & Stamping Technology

基　　金：广东省中国科学院全面战略合作项目(2012B091100251)

摘　　要：某汽车车门玻璃导轨结构件形状复杂,需要经过压弯、拉深、修边、整形、翻边、冲孔、切断等工序进行冲制。通过对该结构件进行冲压工艺分析和工艺参数计算,确定了双排排样、双侧载体的13工位级进模冲压工艺方案;对级进模的压弯-拉深结构、浮动翻边-整形结构和整体结构进行分析,并以此为依据设计和制造出该汽车结构件的多工位级进模。试冲结果表明,所设计的13工位级进模结构合理可靠、产品成形质量好、生产效率高,可以满足大批量生产的需要。The structural part of the glass rail in the car door is complexly shaped. It is produced through various processes like bending, drawing, trimming, shaping, flanging, punching, cutting, etc. Its stamping technology scheme of thirteen progressive positions with double-row and bilateral carrier was determined by stamping technological analysis and calculation of technological parameters. The design and manufacture of progressive die were conducted based on analyzing the bending-drawing composite structure, floating flanging-shaping structure and the whole structure. The results of the actual production show that the thirteen-position progressive die is of high quality, feasible structure, and efficient production, so that it meets requirements of large-scale production.

关 键 词：汽车结构件 级进模 排样设计 玻璃导轨 

分 类 号：U463.83[机械工程—车辆工程]