TA15钛合金铣削力及薄壁结构铣削工艺的试验研究  

Experimental Study on Milling Force of TA15 Ti Alloy and Milling Technique of Shell Construction Fan Shiping

作　　者：范世平[1] 谭智[1] 

机构地区：[1]沈阳机床(集团)有限责任公司

出　　处：《工具技术》2014年第8期69-72,共4页Tool Engineering

基　　金：国家科技重大专项(2011ZX04016-21)

摘　　要：在实际加工钛合金零件常用的铣削工艺参数范围内对TA15钛合金的铣削力展开了试验研究,得出了以两种常用铣刀铣削TA15钛合金时的铣削力经验公式,并把这两种不同类型铣刀的铣削力做以比较。利用铣削力试验所得出的结论,对实际铣削加工TA15钛合金过程中铣削工艺参数的选择提出了建议。The milling force of TA15 Ti alloy had been studied experimentally. The empirical equations of two kinds of milling cutter had been built up. The milling force of these two kinds of milling cutter had been compared. Some reasonable advice have been brought forward through milling force experiment to choose milling parameter when milling TA15 Ti alloy

关 键 词：TA15钛合金 铣削力 经验公式 正交试验 薄壁变形 

分 类 号：TG54[金属学及工艺—金属切削加工及机床] TG501.3