轧制温度对AZ31B镁合金板材边裂和组织的影响  

Effects of Rolling Temperature on Edge Crack and Microstructure of AZ31B Magnesium Alloy Plate

作　　者：黄志权[1] 黄庆学[1] 马立峰[1] 林金保[1] 

机构地区：[1]太原科技大学机械工程学院重型机械教育部工程研究中心,山西太原030024

出　　处：《热加工工艺》2014年第17期1-4,共4页Hot Working Technology

基　　金：国家重点基础研究发展计划项目(2011CB612204);国家自然科学基金项目(51105264;51204117);山西省科技创新项目(2013101013);太原科技大学研究生科技创新项目(20125002)

摘　　要：通过热轧实验测试、金相观测和有限元分析,研究了轧制温度对AZ31B镁合金铸轧板边裂和组织的影响,以及板坯辐射散热过程中的温度分布。结果表明：实际轧制温度控制在350-400℃时,有较为理想的成材率和晶粒组织;沿板宽方向,板坯中部温度明显高于边部,致使轧制过程中板坯中部纵向延伸大于边部,边部不均匀变形和中部给予边部的纵向附加拉应力是边裂产生的直接原因;边部裂纹附近伴有明显的孪晶组织。The effects of rolling temperature on edge crack and microstructure of the roll casting AZ31B magnesium alloyplate, and the temperature distribution were studied by hot rolling experiment, metallographic observation and finite elementanalysis. The results show that： when the actual rolling temperature is controlled between 350℃ and 400℃, the rate of finishedproducts and grain structure are perfect. Along the direction of the plate width, the central temperature of the plate is higherthan that of its edge, and the central longitudinal extension of the plate is larger than that of the edge, therefore, edge unevendeformation and central to the edge additional longitudinal tensile stress is the direct reason for the edge crack. Cracks aresurrounded with twin crystal.

关 键 词：AZ31B镁合金 边裂 温度场 微观组织 

分 类 号：TG335.12[金属学及工艺—金属压力加工]