酸、碱料超厚料层混合烧结试验  

Experiment on hybrid sintering of acid and basic materials with extra-deep bed

作　　者：万新宇[1] 吕庆[1] 陈树军[2] 冯帅[1] 

机构地区：[1]河北联合大学冶金与能源学院,河北唐山063009 [2]东北大学材料与冶金学院,辽宁沈阳110819

出　　处：《中国冶金》2014年第9期33-38,共6页China Metallurgy

基　　金：河北省自然科学基金资助项目(E2013209339)

摘　　要：利用现有烧结工艺、原料和加工设备,提出一种全新烧结工艺——酸、碱混合烧结工艺。本工艺在碱性烧结料强化制粒的同时,与酸性球团在入烧结机前进行混合,最后在烧结机上实现酸性球团与碱性料混合烧结（料层厚度为1 000mm）。研究结果表明,采用新工艺后,料层透气性改善明显,1 000mm料层的负压为985kPa,优于600mm普通料层的1 209kPa;另外,加入5~8mm的球团明显比加入大于8mm球团透气性好。当酸性料用量为40%,配碳量（质量分数）为3.8%,烧结负压为1 200kPa时,烧结矿各项产、质量指标最好。By using the existing sinter technique, material and processing equipment, a new sintering technolgy is put forward in this project. It can achieve hybrid sintering on the sintering machine with an exthra-deep bed （1000 mm） to enhance pelletization effect of basic materials, which is mixed with acid pellet before distributing on the sintering machine. Results show that after adopting the new technique, the material layer permeability improved significantly. The negative pressure of 1000mm material layer was only 985kPa which was better than 1209kPa of 600mm material layer was. Moreover, the permeability of adding 5-8mm pellets was significantly higher than adding 8 mm pellets. When the amount of acid pellets was 40 %, with wc = 3.8 %, 1200 kPa vacuum sintering, the quality of the sinterwas the best.

关 键 词：碱性料 超厚料层 酸性球 混合烧结 透气性 

分 类 号：TF046.4[冶金工程—冶金物理化学]