基于SUFI-2算法的SWAT模型在陕西黑河流域径流模拟中的应用  

Application of the SWAT model into the runoff simulation based on SUFI-2 Algorithm in Heihe river basin of Shaanxi Province

作　　者：刘睿翀 霍艾迪[1] Chen X H 王菊翠[1] 席丹[1] 

机构地区：[1]长安大学环境科学与工程学院,陕西西安710064 [2]School of Natural Resources,University of Nebraska-Lincoln,Lincoln,NE 68583-0996,USA

出　　处：《干旱地区农业研究》2014年第5期213-217,222,共6页Agricultural Research in the Arid Areas

基　　金：国家自然科学基金项目“半干旱河流潜流带中淤塞-去淤塞的机理研究”(41072183);省级大学生创新创业训练计划(201310710060)

摘　　要：参数率定及敏感性分析是用来提高模型精度,确定模型关键参数及改善模型结构的非常有效的方法。本文基于SUFI-2算法,通过SWAT模型对陕西黑河流域进行了模拟,同时基于SUFI-2算法对模型参数进行了敏感性分析,结果表明:(1)影响黑河流域径流模拟结果精度的主影响因子是scs径流曲线参数;(2)用2005年到2011年的实测径流资料对模型进行了率定与验证,模拟确定性系数R2和模型效率系数ENS均高于0.8;(3)通过SUFI-2算法与SCE-UA算法比较,发现SUFI-2算法所需时间短,精度更高。Parameter calibration and sensitivity analysis are very effective methods to improve the accuracy of the model,to determine the key parameters of the model and improve the model structure .Through the SWAT model,this paper simulated the Heihe River Basin,meanwhile carried out the sensitivity analysis for the model parameters based on the SUFI-2 Algorithm .The results shown that：（1）The main factor affecting the accuracy of the runoff simulation re-sults in the Heihe River Basin was the parameter of the scs runoff curve .（2）The model was calibrated and validated by using the measured runoff data of 2005 to 201 1,the simulated determination coefficient （R2）and model efficiency coeffi-cients （ENS）were total higher than 0 .8 .（3）By comparing the SUFI-2 Algorithm with SCE-UA Algorithm,we can find out the SUFI-2 Algorithm with higher accuracy and using short time .

关 键 词：SUFI-2算法 径流模拟 敏感性分析 参数率定 

分 类 号：S273.29[农业科学—农业水土工程]