检索规则说明:AND代表“并且”;OR代表“或者”;NOT代表“不包含”;(注意必须大写,运算符两边需空一格)
检 索 范 例 :范例一: (K=图书馆学 OR K=情报学) AND A=范并思 范例二:J=计算机应用与软件 AND (U=C++ OR U=Basic) NOT M=Visual
作 者:王国东[1] 倪璐[1] 朱红伟[1] 王赛丽[1]
机构地区:[1]河南理工大学电气工程与自动化学院,河南焦作454003
出 处:《应用光学》2014年第5期785-788,共4页Journal of Applied Optics
基 金:国家自然科学基金(U1304608);河南省高校青年骨干教师支持计划基金(2012GGJS-056);河南理工大学杰出青年(52013-05)
摘 要:为了提高长波量子阱红外探测器的灵敏度及探测率,采用表面等离激元效应来提高量子阱红外探测器中二维光栅的耦合效率。利用三维时域有限差分算法,分析表面等离激元作用下,长波量子阱红外探测器中二维金属薄膜光栅参数对入射光的调制作用。计算结果表明,对于8μm的入射光,当光栅周期P=2.8μm,孔直径D=1.4μm,光栅层厚度L=0.04μm时,XY平面内Z方向电场值最大,光栅的耦合效率最高。In order to improve the sensitivity and detectivity of the long-wavelength quantum well infrared photodetector(QWIP),the surface plasmon was adopted to enhance the optical coupling efficience of two-dimensional grating.The modulation effects of the 2-D metal film grating parameters in long-wavelength QWIP on the incident light were analyzed by using the3-D finite-difference time-domain(FDTD)algorithm based on surface plasmon.Calculation results shown that the electric field along the Z direction reaches its maximum in the X-Yplane when the grating parameters were taken as P=2.8μm,D=1.4μm and L=0.04μm for 8μm incident light.
关 键 词:量子阱红外探测器 表面等离激元 二维光栅 耦合效率
分 类 号:TN362[电子电信—物理电子学]
正在载入数据...
正在载入数据...
正在载入数据...
正在载入数据...
正在载入数据...
正在载入数据...
正在载入数据...
正在链接到云南高校图书馆文献保障联盟下载...
云南高校图书馆联盟文献共享服务平台 版权所有©
您的IP:216.73.216.15